1. The total machine adapt PLC controlling print unit and slot phase adjustment, easy to operate and reliable.
2. Whole machine frame and important part are being aging treatment, tempering eliminate the stress of metallic; all of them come from high precision processing center, CNC grinding machining process. All the rollers are high quality steel, high precision Computer dynamic balancing correction of hard chromium plating, surface grinding.
3. The transmission gear adopt 40 CrMin Ti high quality alloy steel which is grinded, and after the heat treatment ,it can up to six precision, Its surface with rockwell hardness HRC58-62, make color more accuracy.
4. Each unit of the machine with electric separation, and pneumatic locking, pneumatic total lock, to ensure the stability of the unit, and continue ring for caution when machine be separated, to ensure the safety of operating person.
5. The machine with emergency stop switch at front, middle and back section.
6. Every unit of machine with emergency stop switch, so the machine can be stopped between the unit, it can ensure the workers safe (remark: every unit moving is drag by feeder unit)
7. All the machine electric parts application keyless connecting ring, eliminating the gap generated by the traditional connection, keep the long-term precision of printing chromatic.
8. The machine lubrication system uses a spray automatic lubrication, and with the device impermeable to oil spills institutions.
I. Main parameter
Plate roller dia
Plate roller length
Inner width of machine
max printing size
max feeding paper size
skip feed paper size
min feeding paper size
machine frame thickness
main motor power
max slotting depth
min slotting distance
feeder 1) The master control panel by the control buttons and touch screen control operation, convenient and reliable. 2) Lead edge feed (with counter). 3) set for counting of paper, showing the production number. 4) The location of left and right bezel control of mechanical power by the ruler display moving distance. 5) The front bezel to manually adjust the gap. 6) 11KW wind turbine, suction feeding, the electric inverter to adjust the air volume, according to board bending different, so air flow adjustments to ensure smooth paper. 7) The dust removal device and fan brush the surface clean cardboard scraps of paper.
11) sending paper up roll diameter 149 mm, thick-walled seamless steel pipe, wrapped in plastic wear phase, that is to maintain flexibility and ensure that the surface wear and reduce the squash into the board. 12)front feed under the roller diameter 159 mm, back feed under diameter 149 m, quenched and tempered seamless steel grinding the surface of hard chromium plated embossed and treatment. Back feed up roller diameter100 mm. 13) The transmission uses two roller drive Oldham Coupling, reducing wear and tear to make the drive more stable. 14) the use of electric sub-machine fit, with a continuous alarm warning lights the move to ensure the safety of operations. 15) shaft with electromagnetic friction clutch, to prevent malfunction or overload protection of the motor will not burn. 16) feeder, printing department, the Department of cutting electric automatic zero. 17) Pneumatic chain of devices.
B, the Department of Printing 1, the print roller 1) The print version of roller with thick outer 405 mm(including plate thickness will be 420mm) 2) Printing of high quality thick-walled seamless steel roll, surface conditioning, grinding, hard chromium plating. balance correction, smooth operation. 3) hanging tube axis, side lock, so hanging on the bit accurate, convenient and fast. 4) full-groove peg board for hanging bar 10mm. 5) handling print, the foot switch is convenient and flexible electric control reversing. 2, the embossing roller 1) embossing roller diameter 188mm. 2) thick-walled seamless steel pipe, surface grinding, hard chromium plating. 3) balance correction, smooth operation. 4) Adjust the gap taken roller to manually adjust the structure, adjust the range of 0-11mm 3, the transfer ink roller 1) roller diameter 212 mm (line number 180 Line -250 lines). 2) thick-walled seamless steel surface after grinding the surface of ground, pressed textured, hard chrome plating. 3) the same network, even on the ink, printing plates and rubber roller to extend service life. 4) pneumatic feeding system with automatic lifting device (network printing and print exposure roll down, stop printing, anilox roller and plate separation increased). 5) The roller gap structure manually adjust the range of 0-11mm. 4, uniform ink rubber rollers 1) uniform ink rubber roller diameter 208.28 mm. 2) High quality seamless steel pipe wrapped durable, corrosion resistant, wear-resistant rubber. 3) special high rubber roller grinding, diameter 1.6-1.8 mm, transfer ink effect. 4) rubber roller gap adjustment lock structure by hand, adjust the range of 0-11 mm. 5, Phase adjustment 1) The planetary gear structure. 2) printing phase digitally controlled by computer and electric adjustment of 360 ° (run, stop can be adjusted.) the accuracy is 0.15mm. 3) print roller bits used to adjust the frequency control. Zero and the adjusted version of fast, high precision tune version. 4) the use of electric mechanical horizontal adjustment phase, the control of ± 5 mm. 5) The whole auto-zero in each group, the accuracy is0.5mm, and then automatically adjusts the phase, try one, and then enter the number of fine-tuning, greatly reducing the waste of cardboard 6, ink loop structure 1) pneumatic diaphragm pump for ink stability, operation and maintenance simple. 2) The ink filter, filter impurities. 7, the printing phase fixtures 1) Electromagnetic clutch brake type brake mechanism, when the unit adjusting the phase separation, the brake mechanism limits gears to keep the original tooth position of fixed points. 2) The impression of power transmission roller type transmission using cross slide to reduce wear and tear transmission more stable
1.the slotter knife thickness 7mm, manfactured by high alloy , tooth profile cutting sharp , the abration resistance high
2.the slotter knife phasing crganization , the overtone structure , the frequency changer controls the brake , static 360 degree adjustment .
3.the slotter knife apron derailing uses the electrically operated control, the adjustment is quick and accurated.
4.regards the user to need to be possible to match the punch insiaiment
5.slotter deepartment canada supposes the prccop pression to roll around , sharpens the cardboard resistand to compression ability
6.the line ball cut the angle trun place addition compressing wheel disk , guaranteed the mouth paper box sticks the place to compress
D, stacking machine
1) The paper can then manually adjust automatically. 2) splicing speed and feed speed is synchronization, then the paper speed can be adjusted independently 3) The stack height of 1700 mm 4) bed units lifting strength chain drive. 5) The splicing platform equipped with anti-fall device to ensure operator safety. 6) take action paper hanging pressure plates stacked in cardboard to a certain height, then lift up out of cardboard board automatically. 7) plane wrinkle belt, to prevent the cardboard down. 8) received a separate paper to adjust the belt tension arm, without the belt length limit.